Editor's Note: Jason Howe is a highly accomplished networking engineer at PEI. All of the opinions expressed in this commentary belong to the author. If you have had to setup...
Read More
It’s easy to get a full backup of an ASA by using ASDM and there are advantages of this method over using CLI. Here’s a walkthrough of how to obtain…
Here’s a quick walkthrough on how to add and remove devices (MX series and Z1) from the Meraki Dashboard to keep everything in your network up to date. How to...
Read More
If you have a new ASA and would like to upgrade the ASA and ASDM image before configuration, here’s a quick walkthrough of how to do just that using the…
Here’s how to set up SSH on a new ASA out of the box, as well as set up local authentication. Step 1: Configure aaa to use local database for…
The Case for More Intelligent Security More and more companies are starting to rely on Managed Security Service Providers (MSSPs) to make sure they are protected from the growing number...
Read More
Here is a unique issue that happened to me when setting up a pair of firewalls. Symptom: I had two firewalls sitting in the same outside network. Both firewalls could…
So we’ve run into this problem a couple of times. The symptom is DHCP being issued from a Cisco ASA (multiple devices/versions), but not being “accepted” by the DHCP client. …
Looks to me that a recent firmware change took place with CiscoC220-M5 servers that requires adding an extra item in UEFI configuration. When booting the server you are greeted with…
This blog is to help explain the steps for setting up Anti-Malware Protection (AMP) on the Cisco Security Management Server. The point of AMP is to stop malicious files from...
Read More
